Readme before you start!!!
-----------------------------------

1. There are a couple of bash files (with .sh extension). Change their permission to "executable" by doing this: Choose "properties" on right clicking the files and then go to permissions. Check the option "allow executing the file as program".
You need to configure your synaptic package manger by choosing the repositories (Server for India/Main server) under Settings.
The network settings should be configured with proxy settings.
2.  Open terminal and go to the directory where you have saved the installer folder. Do the following
./HART_installer.sh
The installer asks for proxy (login and pwd),  pwd for your laptop for going to super user mode, choosing the scilab installation etc. 
3. Once the toolbox installation is done, the prompt will show "--->" (this is because it has gone to scilab through command line). Press Ctrl + Z at this point.
4. Now run 
./initialise.sh
5. Your toolbox installtion is complete. To verify it, go to terminal, type
sudo scilab
6. Load the toolbox by clicking on Toolboxes and then hart_0.4.4
7. Then open Xcos, See if the "hart" pallette has blocks of Comedi in it.
